209 Stafford St, Worcester, MA 01603Get directionsMon–Fri 8AM–5PM · Sat 9AM–2PM
Engine & Check Engine Light

BMW 650i Failed the Massachusetts Emissions Inspection: Fuel Injectors, Oxygen Sensors and Two Oil Leaks

A BMW 650i failed the state emissions inspection because of failing fuel injectors. We fitted the latest-version OEM injectors and new oxygen sensors on both banks, inspected the camshafts, replaced the valve cover gaskets and fixed an oil leak from the upper and lower oil pan gaskets.

White BMW 650i with the hood open in the Iron Wolf Motors shop in Worcester, MA, showing the twin-turbo V8 engine bay with a socket set laid out on top

How it arrived

Came in after failing the Massachusetts state emissions inspection.

Reported symptoms

  • Failed the state emissions inspection
  • Fuel injector failure on the V8
  • Engine oil leaking from the valve covers and the oil pan

Outcome

The injectors were replaced with the latest-version OEM parts, the oxygen sensors on both banks were replaced, the camshafts were inspected, and the valve cover and oil pan gaskets were replaced to stop the leaks. New parts carry our 12-month / 12,000-mile warranty, whichever comes first.

This BMW 650i came to us with a failed Massachusetts emissions inspection. The cause was the fuel injectors: on this twin-turbo V8 a failing injector upsets the mixture on its bank, and the car’s own monitoring flags it, which is enough to fail the test.

Latest-version OEM injectors

We replaced the injectors with the latest version of the OEM injector. BMW has revised the injectors on this engine over the years, and fitting the current part rather than the same version that had already failed is the point of the repair.

The oxygen sensors on both banks were replaced as well. They are what the engine uses to read the mixture, and on a car that has been running with bad injectors you want the readings after the repair to be trustworthy.

While the top of the engine was open

With the engine opened up we inspected the camshafts and replaced the valve cover gaskets. We also fixed an engine oil leak from the upper and lower oil pan gaskets. Oil leaks are common on this engine as it ages, and doing the gaskets while the access is already there saves the owner paying for the same labor twice.

BMW 650i twin-turbo V8 engine bay with the hood open and a socket set on top of the engine
The 650i in the bay, hood up, mid-job.
From the job

What we photographed

White BMW 650i with the hood open and the V8 engine bay exposed
The 650i in the shop with the hood up.
FAQ

Questions this job raises

Can bad fuel injectors make a BMW fail the Massachusetts inspection?

Yes. On this BMW 650i, failing fuel injectors were the reason it did not pass the state emissions inspection.

Should you replace BMW injectors with the same part number?

On this 650i we fitted the latest-version OEM injectors, not the version that had failed. BMW revises parts over time, and the current version is the one to fit.

Why replace the oxygen sensors at the same time?

They read the mixture the injectors deliver. We replaced the sensors on both banks so the readings after the repair can be trusted.

Do you fix BMW oil leaks in Worcester?

Yes. On this car we replaced the valve cover gaskets and the upper and lower oil pan gaskets at our Worcester, MA shop.