209 Stafford St, Worcester, MA 01603Get directionsMon–Fri 8AM–5PM · Sat 9AM–2PM
Engine & Check Engine Light

Subaru WRX Check Engine Light: P0016 and P0018, and Both Timing Chains Replaced

A Subaru WRX came in for a check engine light. The codes were P0016 and P0018, a crankshaft-to-camshaft correlation fault on both banks. We replaced the complete timing chain set on both banks: chains, sliders and tensioners.

Blue Subaru WRX on a lift at Iron Wolf Motors in Worcester, MA with the hood open and the front of the boxer engine taken apart for a timing chain replacement

How it arrived

Driven in with the check engine light on.

Reported symptoms

  • Check engine light on

Outcome

The complete timing chain set was replaced on both banks — chains, sliders and tensioners. New parts carry our 12-month / 12,000-mile warranty, whichever comes first.

Read from the factory tooling

The codes this car was reporting

P0016
Crankshaft position / camshaft position correlation, bank 1 sensor A.
P0018
Crankshaft position / camshaft position correlation, bank 2 sensor A.

This Subaru WRX came in for a check engine light. The diagnostic found two codes: P0016 and P0018.

What P0016 and P0018 mean together

Both codes are crankshaft-to-camshaft correlation faults. The engine compares where the crankshaft is with where the camshafts are, and these codes set when the two no longer line up the way they should. P0016 is bank 1, P0018 is bank 2: on the WRX’s boxer engine, one code for each side.

One correlation code on its own can be a sensor or a cam timing actuator. The same fault on both banks at once is the signature of the part they share: the timing chain system. A stretched chain, worn sliders or a tired tensioner let the cam timing drift on both sides.

Front of the Subaru WRX boxer engine with the timing cover removed, showing the timing chains, cam sprockets and tensioners on both banks
Timing cover off. The chains and sprockets on both banks are visible.

The repair

We replaced the complete timing chain set on both banks: the chains, the sliders (the guides the chains run on) and the tensioners. Replacing only a chain and reusing worn guides and tensioners is how the same codes come back.

Subaru WRX on a two-post lift with the hood up and the front of the engine apart
The WRX on the lift with the front of the engine apart.
From the job

What we photographed

Subaru WRX on the lift with the front of the engine taken apart
On the lift, front of the engine apart.
Subaru WRX timing chains and cam sprockets exposed on both banks
Timing chain system on both banks.
Subaru WRX engine bay from the side with the front of the engine apart
The engine bay mid-job.
Blue Subaru WRX in a service bay at Iron Wolf Motors
The WRX in the bay.
FAQ

Questions this job raises

What do P0016 and P0018 mean on a Subaru WRX?

Both are crankshaft-to-camshaft correlation faults: P0016 on bank 1 and P0018 on bank 2. On this WRX the cause was the timing chain system.

Should you replace only the timing chain?

No. On this WRX we replaced the complete set on both banks: chains, sliders and tensioners. Reusing worn guides and tensioners lets the fault return.

Can I keep driving with P0016 and P0018?

It is not a good idea. A stretched chain can jump a tooth, which can turn a timing chain repair into engine damage.

Do you repair Subarus in Worcester?

Yes. We did this WRX timing chain job at our Worcester, MA shop.